Features
- RoHS full compliant
- DFB uncooled laser diode
- High sensitive APD-TIA
- Enhanced optical isolation
- Operating under wide temperature range
- LC/APC Pigtail type, Fiber: 9/125µm Single mode
- Contained a TX and RX FPC
XGSPON ONU BOSA
XGSPON ONU BOSA
It is the RoHS compliant single-fiber optical sub assembly which is designed for bi-directional FTTx applications. The device consists of two main sub-units; the 10Gb/s 1270nm DFB LD for transmitting digital (burst mode) upstream voice/data signal and the InGaAs APD-TIA for the reception of 10Gb/s digital downstream at 1577nm. The device utilizes the optical filters for splitting the beam and enhancing the optical isolation.
Product Consult
Introduction
Specifications
Related Products
Related Applications
Introduction
介紹
Specifications
規格表
DRAG TO VIEW
BASE
Data Rate (Gbps)
TX Wavelength (nm)
RX Wavelength (nm)
Operating Temp. (℃)
Optical Output (dBm)
Sensitivity (dBm)
9.953
1260~1280
1575~1580
-40~85
4~8
-28.5
Related Products
關聯產品
25GPON ONU BOSA
It is the bi-directional optical subassembly (BOSA) devices designed for 25GS-PON ONU N2 Class. A 25Gbps burst mode DFB laser operated at 1286nm is used for transmitting digital upstream voice/data signal. An InGaAs APD-TIA is adopted for the reception of 25Gbps continuous mode down stream signal at 1358nm. The BOSA utilizes the optical filters for splitting the beam and enhancing the optical isolation.
TT BOSA
It is the RoHS compliant single-fiber optical subassembly which is designed for Bi-directional module. It is integrated with one 1.25Gb/s 1310nm FP or DFB LD and one 1.25Gb/s 1550nm FP or DFB LD together with optical filters for beam direction.
ROSA
(Receiver Optical Sub-assembly)
It is InGaAs PIN Photodiode is a high quality analog photodetectors design for high speed and low noise voice and video communications. A streamlined coaxial module is aligned to a position where responsivity, back reflection and distortion are optimized..
4GHz TOSA
It is 1550nm or 1310nm DFB laser diode module designed for fiber optic communication network. This module is transmitter optical sub-assembly(TOSA) with low threshold current and high performance at high temperature. It is a SC/APC pigtail type and metal integrated with laser welding.
Combo PON OLT BOSA
It is the RoHS compliant single-fiber optical subassembly which is designed for XGS-PON and G-PON applications. The device consists of four main sub-units; The transmitter is integrated with 1577nm 10Gb/s EML LD and 1490nm 2.5Gb/s DFB LD. The receiver is integrated with 10G/s 1270nm and 1.25G/s 1310nm burst-mode APD-TIA. The device utilizes the optical filters for splitting the beam and enhancing the optical isolation.
Combo PON ONU BOSA
It is the RoHS compliant single-fiber optical subassembly which is designed for XGS-PON and G-PON applications. The device consists of four main sub-units; The transmitter is integrated with 1270nm 10Gb/s DFB LD and 1310nm 1.25Gb/s DFB LD. The receiver is integrated with 10Gb/s 1577nm and 2.5Gb/s 1490nm APD-TIA. The device utilizes the optical filters for splitting the beam and enhancing the optical isolation.
XGSPON ONU BOSA with OTDR reflectors
It is the RoHS-6/6 compliant single-fiber optical subassembly which is designed for bi-directional FTTx applications. The device consists of two main sub-units; the 10Gb/s 1270nm DFB LD for transmitting digital (burst mode) upstream voice/data signal and the InGaAs APD-TIA for the reception of 10Gb/s digital downstream at 1577nm. The device utilizes the optical filters for splitting the beam and enhancing the optical isolation. The BOSA include a OTDR light reflector.
XGSPON ONU Tri-OSA
It is the RoHS compliant single-fiber optical subassembly which is designed for tri-directional FTTx applications. The device consists of three main sub-units; the 10Gb/s 1270nm DFB LD for transmitting digital (burst mode) upstream voice/data signal, the InGaAs APD-TIA for the reception of 10Gb/s digital downstream at 1577nm, and the analog detector (InGaAs PIN) receiving RF signal at 1550nm. The device utilizes the optical filters for splitting the beam and enhancing the optical isolation. It operates under the industrial temperature range and also meets the requirement specified in ITU-T G984.5 standard.
Related Applications
關聯應用
Next Generation Passive Optical Network
EZconn's optical communication products are developed by integrating optical, electronic, mechanical and materials technologies. The products include equipment distribution.
Product Consult
Choose the product you’re interested in, complete the form, and our team will contact you right away.
USE THE MENU BELOW TO FIND YOUR PRODUCT
OR VISIT THE PRODUCT PAGE FOR MORE DETAILS
Next
Product Consult
Choose the product you’re interested in, complete the form, and our team will contact you right away.
XGSPON ONU BOSA
Reset
Send
Modal4